Communication is now possible on any sportive event
Slip resistant printable vinyl
Examples of application
• Sponsoring of all sportive events
• Marathons
• Basketball, volleyball playgrounds
• Short outdoor communication for pedestrian use
• Street marketing
• Road shows
Some of the advantages of SportWalk
• Indoor: can be used for short and mid-term bonding. Up to 3 months
• Outdoor: can be used for short term bonding. Up to 1 week
• Is applicable indoor and outdoor on smooth surfaces
• Is easy removable without residue even after long use
• Extremely secure with its slip-resistant surface
• A large variety of applications
• Waterproof adhesive for short-term outdoor applications
• Can be cut with a normal cutting plotter and makes any shape possible
• Good chemical resistance for best hygienic conditions
• No lamination: print, let dry and apply
• No heat needed for application on dry surfaces
Description
The pressure sensitive foil can be used for short and mid-term bonding. The material is a heavily
embossed anti-slip vinyl that has been engineered with an strong adhesive system to adhere to a
wide variety of surfaces. The pressure sensitive adhesive covered by a removable liner.
SportWalk is characterized by an extremely secure and slip-resistant surface, a chemical resistance
and longevity. The waterproof adhesive makes an outdoor usability possible for short
term. SportWalk has been approved and tested by several test labs and is classified by the Euro-
Norm as DIN/EN.
Durability
The durability depends on the way the product has been applied, in particular on careful press as
well as on the condition of the surface and the frequency of the area. We recommend a 3
months use for indoor applications and 1 week for outdoor applications.
Storage
It is recommended to store the product in the closed packaging preferable at a temperature of +15°C
to +30°C and a relative humidity in the range of 45% to 60%. The product has a shelf life of 24 month
after purchasing the material.
Waste handling
SportWalk can be burned after use and it is recommended to handle the production waste and
the used material as industrial waste.
Warranty
The product has been used in many places under all possible conditions and has proven its reliability
and performance. Since further circumstances such as application of the foil are not controllable,
all product warranty automatically ends as soon as the product has been applied to any
surface.
Technical information
Size: Width: 1.30 m
Film: vinyl foam (0.457 mm) Adhesive: clear adhesive on an acryl basis (0.051 mm)
Release liner: paper liner (0.178 mm)
Peel Adhesion to: Stainless Steel Polyethylene Powder coated surfaces *
15 minute dwell 55oz/in (66N/100mm) 20oz/in (22N/100mm) 40oz/in (44N/100mm)
24 hours dwell 75oz/in (82N/100mm) 25oz/in (27N/100mm) 55oz/in (60N/100mm)
Further data:
Coefficient of Friction (Kinetic) Dry / Wet Rubber: 0,9 / 1,0 Leather: 0,3 / 1,0
Minimum application temperature +10°C / +50°F**
Service temperature minimum and maximum -28°C/-20°F / +104°C/+220°F
Flammability to be tested
Chemical resistance
* Color and lot variances of coated surfaces including paints, powder coatings, lacquers, stains, and other treatments may vary the performance of the tape and should be evaluated for the compatibility of the tape to the specific surface. **At temperatures below +10 °C the surface has to be pre-treated with a gas burner.
Diesel Fuel R
Hydraulic Fluid R
50% Anti-freeze in water R
Methyl Ethyl Ketone NR
Mineral Spirits R
99% IPA R
Water R
10% Salt Water R
Bleach R
Trichloroethylene NR
25% Sulfuric Acid I
1% Sodium Hydroxide R
Gasoline unleaded R
R = recommended for non continuous immersion; (I) = recommended for intermittent exposure only ; NR = not recommended